Please kindly notice:
ODIS 6.10 installation guide on VAS 5054A is the same as VAS 6154, the main difference is that VAS6154 needs to install VAS Driver 1.8.1.1012. (step 8 as below)

Main steps:

Step 1: Copy all 5 ODIS V6.10 software from DVD and paste to the local disk of the computer
It will take a long time, please be patient.

Software files including:
-Windows update (if you need)
-Setup
-ODIS 6.10 license
-Patch
-Drivers
-ODIS-Service-update_6_1_0-EU files

Step 2: Update windows system depends on your need

Step 3: Restart computer after updating windows system

Step 4: Unzip ODIS service installation file
odis service installation file
Install OffboardDiagSetup-service_VWMCD_6_1

Select the language you want
odis select language

Choose target folder

Select the corresponding diagnostic interface
Select the license “license.dat” on local disk

Install device software

Step 5: Copy the offboardDiagLauncher from local disk to program files (x86)

Step 6: Run Offboard Diagnostic information system as administrator

URL: D disk/ODIS 6.10/ODIS-Service_update-6_1_0-EU
User name: abc
Keyword: abc

Select the corresponding language

Download ODIS data

Step 7: Copy the Patch “softing” and paste to lock disk (C:) Program files (x86)

Step 8: Install VAS6154 Driver –VAS Driver 1.8.1.1012
Then you can run the software to diagnose

Recently, some customers reported that the porsche Piwis 2 software was stuck when it was running.
1. Open the software

2. Select the model to be tested, and the software is stuck in the following interface

This is because porsche Piwis 3 has replaced porsche Piwis 2 products, so piwis 2 software is no longer upgraded. When the computer time comes to 2021, the program will not run.

The solution is as follows:
1. Set your computer time back to the time before 2020
2. Restart your computer, and then open the software, the software can run normally.

As the software is no longer updated, porsche Piwis 2 can no longer test Porsches after 2018. It is recommended that you can use the latest Porsche Piwis 3 Diagnostic Tool.

Today,let’s learn how to use Xtool X100 Pad2 with KC100 Adapter Program 5th IMMO for Audi A6L 2013 .

The first one key is original and the remote is working,the second one is blank to be programmed.

Guide in words step by stpe :

1. Tap “X100 pad2″on the screen.

2.Tap “VW/Audi Skoda/Seat”

3.Tap “4th/5th immobilizer system”.

4. Have two options”4th immobilizer system” and “5th immobilizer systerm”,Audi A6L 2013 is 5th immobilizer systerm.

5. It can’t indentify the VIN code because the ignition doesn’t turn on,just go to switch the ignition on.

6. 5th immobilizer system function menu.

1). Read immokey.

2). Show security data

Have 3 keys.

3). Make dealer key.

Please plug the KC100 into tablet,press(OK) to continue.

The KC100 adapter indicator turn blue means it powers on.

Put the original key into the coil of KC100 adapter.

Then put the blank key that ready to add to the coil of KC100 adapter

Writting key……

Create dealer key success.

4). Learn the key.

Turn the ignition on,click “OK”.

Read the note

Input the number of keys to match

put the blank key to the sensor area.

7. The first one learn successfully.

8. Then put the second one to learn,after learn with success,it prompts”Learning success”

9.Finish match the key

10. Tap “Return” button to exit the system.

To identify the two keys are working or not.

They are working fine.

11. Now I take one key outside of the car and leave one key in the car.

Start the engine. the first key can turn on.

12. Take the first one outside of the car,and another one in the car,start the engine,the key start turn on ok.

The remote is working.

13. X100 PAD 2 with KC100 adapter successfully program 5th immo for audi A6L 2013. Thanks.